 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com 11 11 - 178 linear & power amplifiers - smt hmc453qs16g / 453qs16ge ingap hbt 1.6 watt power amplifier, 0.4 - 2.2 ghz v01.0205 general description features functional diagram the hmc453qs16g & HMC453QS16GE are high dynamic range gaas ingap heterojunction bipo- lar transistor (hbt) 1.6 watt mmic power ampli ers operating between 0.4 and 2.2 ghz. packaged in a miniature 16 lead qsop plastic package, the amp- li er gain is typically 21.5 db at 0.4 ghz and 8 db at 2.1 ghz. utilizing a minimum number of external components and a single +5v supply, the ampli er output ip3 can be optimized to +47 dbm at 0.4 ghz or +51 dbm at 2.1 ghz. the power control (vpd) can be used for full power down or rf output power/ current control. the high output ip3 and pae make the hmc453qs16g(e) ideal power ampli ers for cellular/pcs/3g, wll, ism and fixed wireless applications. output ip3: +51 dbm 21.5 db gain @ 400 mhz 8 db gain @ 2100 mhz 45% pae @ +32 dbm pout +25 dbm cdma2000 channel power@ -45 dbc acp single +5v supply integrated power control (vpd) qsop16g smt package: 29.4 mm 2 electrical speci cations, t a = +25c, vs= +5v, vpd = +5v [1] typical applications the hmc453qs16g / HMC453QS16GE is ideal for applications requiring a high dynamic range ampli er: ? gsm, gprs & edge ? cdma & w-cdma ? catv/cable modem ? fixed wireless & wll parameter min. typ. max. min. typ. max. min. typ. max. min. typ. max. min. typ. max. units frequency range 400 - 410 450 - 496 810 - 960 1710 - 1990 2010 - 2170 mhz gain 19 21.5 18 20.5 12 15 6 9 6 8 db gain variation over temperature 0.012 0.02 0.012 0.02 0.012 0.02 0.012 0.02 0.012 0.02 db / c input return loss 12 15 12 10 15 db output return loss 10 10 15 13 18 db output power for 1db compression (p1db) 29 32 29 32 29 32 28.5 31.5 30 33 dbm saturated output power (psat) 32.25 32.25 32.5 32 33.5 dbm output third order intercept (ip3) [2] 44 47 47 50 46 49 44 50 48 51 dbm noise figure 7 8.5 7 7.5 6.5 db supply current (icq) 725 725 725 725 725 ma control current (ipd) 12 12 12 12 12 ma [1] speci cations and data re ect hmc453qs16g measured using the respective application circuits for each designated frequenc y band found herein. contact the hmc applications group for assistance in optimizing performance for your application. [2] two-tone input power of -10 dbm per tone, 1 mhz spacing.
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com linear & power amplifiers - smt 11 11 - 179 input return loss vs. temperature @ 400 mhz output return loss vs. temperature @ 400 mhz broadband gain & return loss @ 400 mhz gain vs. temperature @ 400 mhz p1db vs. temperature @ 400 mhz psat vs. temperature @ 400 mhz -15 -10 -5 0 5 10 15 20 25 0.1 0.2 0.3 0.4 0.5 0.6 0.7 s21 s11 s22 response (db) frequency (ghz) 12 13 14 15 16 17 18 19 20 21 22 23 24 0.35 0.37 0.39 0.41 0.43 0.45 +25 c +85 c -40 c gain (db) frequency (ghz) -15 -10 -5 0 0.35 0.37 0.39 0.41 0.43 0.45 +25 c +85 c -40 c return loss (db) frequency (ghz) -20 -15 -10 -5 0 0.35 0.37 0.39 0.41 0.43 0.45 +25 c +85 c -40 c return loss (db) frequency (ghz) 24 25 26 27 28 29 30 31 32 33 34 0.35 0.37 0.39 0.41 0.43 0.45 +25 c +85 c -40 c p1db (dbm) frequency (ghz) 24 25 26 27 28 29 30 31 32 33 34 0.35 0.37 0.39 0.41 0.43 0.45 +25 c +85 c -40 c psat (dbm) frequency (ghz) hmc453qs16g / 453qs16ge v01.0205 ingap hbt 1.6 watt power amplifier, 0.4 - 2.2 ghz for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com 11 11 - 180 linear & power amplifiers - smt output ip3 vs. temperature @ 400 mhz noise figure vs. temperature @ 400 mhz gain, power & ip3 vs. supply voltage @ 400 mhz reverse isolation vs. temperature @ 400 mhz acpr vs. supply voltage @ 400 mhz w-cdma, 64 dpch 10 15 20 25 30 35 40 45 50 55 4.5 4.75 5 5.25 5.5 gain p1db psat oip3 gain (db), p1db (dbm), psat (dbm), oip3 (dbm) vs (vdc) -35 -30 -25 -20 -15 -10 -5 0 0.35 0.37 0.39 0.41 0.43 0.45 +25 c +85 c -40 c isolation (db) frequency (ghz) 0 1 2 3 4 5 6 7 8 9 10 0.35 0.37 0.39 0.41 0.43 0.45 +25 c +85 c -40 c noise figure (db) frequency (ghz) 30 32 34 36 38 40 42 44 46 48 50 52 0.35 0.37 0.39 0.41 0.43 0.45 +25 c +85 c -40 c oip3 (dbm) frequency (ghz) -70 -65 -60 -55 -50 -45 -40 -35 -30 -25 -20 -15 -10 8 10121416182022242628 acpr (dbc) channel power (dbm) w-cdma frequency: 400 mhz integration bw: 3.84 mhz 64 dpch 5v 4.5v 5.5v source acpr hmc453qs16g / 453qs16ge v01.0205 power compression @ 400 mhz 0 5 10 15 20 25 30 35 40 45 50 -10-8-6-4-202468101214 pout gain pae pout (dbm), gain (db), pae (%) input power (dbm) ingap hbt 1.6 watt power amplifier, 0.4 - 2.2 ghz for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com linear & power amplifiers - smt 11 11 - 181 input return loss vs. temperature @ 40 mhz output return loss vs. temperature @ 470 mhz broadband gain & return loss @ 470 mhz gain vs. temperature @ 470 mhz p1db vs. temperature @ 470 mhz psat vs. temperature @ 470 mhz -15 -10 -5 0 5 10 15 20 25 0.1 0.2 0.3 0.4 0.5 0.6 0.7 s21 s11 s22 response (db) frequency (ghz) -14 -12 -10 -8 -6 -4 -2 0 0.43 0.45 0.47 0.49 0.51 0.53 +25c +85c -40c return loss (db) frequency (ghz) -20 -15 -10 -5 0 0.43 0.45 0.47 0.49 0.51 0.53 +25c +85c -40c return loss (db) frequency (ghz) 24 25 26 27 28 29 30 31 32 33 34 0.43 0.45 0.47 0.49 0.51 0.53 +25c +85c -40c psat (dbm) frequency (ghz) 24 25 26 27 28 29 30 31 32 33 34 0.43 0.45 0.47 0.49 0.51 0.53 +25c +85c -40c p1db (dbm) frequency (ghz) 12 13 14 15 16 17 18 19 20 21 22 23 0.43 0.45 0.47 0.49 0.51 0.53 +25c +85c -40c gain (db) frequency (ghz) hmc453qs16g / 453qs16ge v01.0205 ingap hbt 1.6 watt power amplifier, 0.4 - 2.2 ghz for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com 11 11 - 182 linear & power amplifiers - smt 36 38 40 42 44 46 48 50 52 54 56 58 0.43 0.45 0.47 0.49 0.51 0.53 +25c +85c -40c oip3 (dbm) frequency (ghz) 10 15 20 25 30 35 40 45 50 55 4.5 4.75 5 5.25 5.5 gain p1db psat oip3 gain (db), p1db (dbm), psat (dbm), oip3 (dbm) vs (vdc) -30 -25 -20 -15 -10 -5 0 0.43 0.45 0.47 0.49 0.51 0.53 +25c +85c -40c isolation (db) frequency (ghz) 0 1 2 3 4 5 6 7 8 9 10 0.43 0.45 0.47 0.49 0.51 0.53 +25c +85c -40c noise figure (db) frequency (ghz) output ip3 vs. temperature @ 470 mhz noise figure vs. temperature @ 470 mhz gain, power & ip3 vs. supply voltage @ 470 mhz reverse isolation vs. temperature @ 470 mhz hmc453qs16g / 453qs16ge v01.0205 acpr vs. supply voltage @ 470 mhz w-cdma, 64 dpch power compression @ 470 mhz 0 5 10 15 20 25 30 35 40 45 50 55 -10-8-6-4-202468101214 pout gain pae pout (dbm), gain (db), pae (%) input power (dbm) -70 -65 -60 -55 -50 -45 -40 -35 -30 -25 -20 -15 -10 8 10121416182022242628 acpr (dbc) channel power (dbm) w-cdma frequency: 470 mhz integration bw: 3.84 mhz 64 dpch 5v 4.5v 5.5v source acpr ingap hbt 1.6 watt power amplifier, 0.4 - 2.2 ghz for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com linear & power amplifiers - smt 11 11 - 183 input return loss vs. temperature @ 900 mhz output return loss vs. temperature @ 900 mhz broadband gain & return loss @ 900 mhz gain vs. temperature @ 900 mhz p1db vs. temperature @ 900 mhz psat vs. temperature @ 900 mhz -15 -10 -5 0 5 10 15 20 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 s21 s11 s22 response (db) frequency (ghz) 8 9 10 11 12 13 14 15 16 17 18 0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1 +25 c +85 c -40 c gain (db) frequency (ghz) -15 -10 -5 0 0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1 +25 c +85 c -40 c return loss (db) frequency (ghz) -25 -20 -15 -10 -5 0 0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1 +25 c +85 c -40 c return loss (db) frequency (ghz) 24 25 26 27 28 29 30 31 32 33 34 0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1 +25 c +85 c -40 c p1db (dbm) frequency (ghz) 24 25 26 27 28 29 30 31 32 33 34 0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1 +25 c +85 c -40 c psat (dbm) frequency (ghz) hmc453qs16g / 453qs16ge v01.0205 ingap hbt 1.6 watt power amplifier, 0.4 - 2.2 ghz for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com 11 11 - 184 linear & power amplifiers - smt output ip3 vs. temperature @ 900 mhz noise figure vs. temperature @ 900 mhz gain, power & ip3 vs. supply voltage @ 900 mhz reverse isolation vs. temperature @ 900 mhz acpr vs. supply voltage @ 910 mhz cdma is95, 9 channels forward 34 36 38 40 42 44 46 48 50 52 54 0.75 0.8 0.85 0.9 0.95 1 +25 c +85 c -40 c oip3 (dbm) frequency (ghz) 0 1 2 3 4 5 6 7 8 9 10 0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1 +25 c +85 c -40 c noise figure (db) frequency (ghz) -30 -25 -20 -15 -10 -5 0 0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1 +25 c +85 c -40 c isolation (db) frequency (ghz) 10 15 20 25 30 35 40 45 50 55 480 520 560 600 640 680 720 760 800 gain p1db psat oip3 gain (db), p1db (dbm), psat (dbm), oip3 (dbm) icq (ma) 10 15 20 25 30 35 40 45 50 55 4.5 4.75 5 5.25 5.5 gain p1db psat oip3 gain (db), p1db (dbm), psat (dbm), oip3 (dbm) vs (vdc) gain, power & ip3 vs. supply current @ 900 mhz* -70 -65 -60 -55 -50 -45 -40 -35 -30 -25 12 14 16 18 20 22 24 26 28 30 acpr (dbc) channel power (dbm) source acpr cdma is95 frequency: 910 mhz integration bw: 1.228 mhz forward link, 9 channels 5.5v 4.5v 5v * icq is controlled by varying vpd. hmc453qs16g / 453qs16ge v01.0205 ingap hbt 1.6 watt power amplifier, 0.4 - 2.2 ghz for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com linear & power amplifiers - smt 11 11 - 185 input return loss vs. temperature @ 1900 mhz output return loss vs. temperature @ 1900 mhz broadband gain & return loss @ 1900 mhz gain vs. temperature @ 1900 mhz p1db vs. temperature @ 1900 mhz psat vs. temperature @ 1900 mhz -15 -10 -5 0 5 10 15 1.2 1.4 1.6 1.8 2 2.2 s21 s11 s22 response (db) frequency (ghz) 0 1 2 3 4 5 6 7 8 9 10 11 12 1.7 1.8 1.9 2 2.1 +25 c +85 c -40 c gain (db) frequency (ghz) -15 -10 -5 0 1.7 1.8 1.9 2 2.1 +25 c +85 c -40 c return loss (db) frequency (ghz) -20 -15 -10 -5 0 1.7 1.8 1.9 2 2.1 +25 c +85 c -40 c return loss (db) frequency (ghz) 24 25 26 27 28 29 30 31 32 33 34 1.7 1.8 1.9 2 2.1 +25 c +85 c -40 c p1db (dbm) frequency (ghz) 24 25 26 27 28 29 30 31 32 33 34 1.7 1.8 1.9 2 2.1 +25 c +85 c -40 c psat (dbm) frequency (ghz) hmc453qs16g / 453qs16ge v01.0205 ingap hbt 1.6 watt power amplifier, 0.4 - 2.2 ghz for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com 11 11 - 186 linear & power amplifiers - smt output ip3 vs. temperature @ 1900 mhz noise figure vs. temperature @ 1900 mhz gain, power & ip3 vs. supply voltage @ 1900 mhz reverse isolation vs. temperature @ 1900 mhz acpr vs. supply voltage @ 1960 mhz cdma 2000, 9 channels forward gain, power & ip3 vs. supply current @ 1900 mhz* 30 32 34 36 38 40 42 44 46 48 50 52 1.7 1.8 1.9 2 2.1 +25 c +85 c -40 c oip3 (dbm) frequency (ghz) 0 1 2 3 4 5 6 7 8 9 10 1.7 1.8 1.9 2 2.1 +25 c +85 c -40 c noise figure (db) frequency (ghz) -20 -15 -10 -5 0 1.7 1.8 1.9 2 2.1 +25 c +85 c -40 c isolation (db) frequency (ghz) 5 10 15 20 25 30 35 40 45 50 55 4.5 4.75 5 5.25 5.5 gain p1db psat oip3 gain (db), p1db (dbm), psat (dbm), oip3 (dbm) vs (vdc) 5 10 15 20 25 30 35 40 45 50 55 480 520 560 600 640 680 720 760 800 gain p1db psat oip3 gain (db), p1db (dbm), psat (dbm), oip3 (dbm) icq (ma) -70 -65 -60 -55 -50 -45 -40 -35 -30 14 16 18 20 22 24 26 28 acpr (dbc) channel power (dbm) source acpr cdma2000 frequency: 1.96 ghz integration bw: 1.228 mhz forward link, sr1, 9 channels 5.5v 4.5v 5v * icq is controlled by varying vpd. hmc453qs16g / 453qs16ge v01.0205 ingap hbt 1.6 watt power amplifier, 0.4 - 2.2 ghz for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com linear & power amplifiers - smt 11 11 - 187 input return loss vs. temperature @ 2100 mhz output return loss vs. temperature @ 2100 mhz broadband gain & return loss @ 2100 mhz gain vs. temperature @ 2100 mhz p1db vs. temperature @ 2100 mhz psat vs. temperature @ 2100 mhz -20 -15 -10 -5 0 5 10 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 3 s21 s11 s22 response (db) frequency (ghz) -25 -20 -15 -10 -5 0 1.9 2 2.1 2.2 2.3 +25 c +85 c -40 c return loss (db) frequency (ghz) -25 -20 -15 -10 -5 0 1.9 2 2.1 2.2 2.3 +25 c +85 c -40 c return loss (db) frequency (ghz) 20 22 24 26 28 30 32 34 36 1.9 2 2.1 2.2 2.3 +25 c +85 c -40 c p1db (dbm) frequency (ghz) 20 22 24 26 28 30 32 34 36 1.9 2 2.1 2.2 2.3 +25 c +85 c -40 c psat (dbm) frequency (ghz) 0 1 2 3 4 5 6 7 8 9 10 1.9 2 2.1 2.2 2.3 +25 c +85 c -40 c gain (db) frequency (ghz) hmc453qs16g / 453qs16ge v01.0205 ingap hbt 1.6 watt power amplifier, 0.4 - 2.2 ghz for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com 11 11 - 188 linear & power amplifiers - smt output ip3 vs. temperature @ 2100 mhz noise figure vs. temperature @ 2100 mhz gain, power & ip3 vs. supply voltage @ 2100 mhz reverse isolation vs. temperature @ 2100 mhz 0 10 20 30 40 50 60 4.5 4.75 5 5.25 5.5 gain p1db psat oip3 gain (db), p1db (dbm), psat (dbm), oip3 (dbm) vs (vdc) -20 -15 -10 -5 0 1.9 2 2.1 2.2 2.3 +25 c +85 c -40 c isolation (db) frequency (ghz) 0 1 2 3 4 5 6 7 8 9 10 1.9 2 2.1 2.2 2.3 +25 c +85 c -40 c noise figure (db) frequency (ghz) 30 35 40 45 50 55 60 1.9 2 2.1 2.2 2.3 +25 c +85 c -40 c oip3 (dbm) frequency (ghz) hmc453qs16g / 453qs16ge v01.0205 acpr vs. supply voltage @ 2140 mhz w-cdma, 64 dpch power compression @ 2100 mhz 0 5 10 15 20 25 30 35 40 45 50 10 12 14 16 18 20 22 24 26 28 pout gain pae pout (dbm), gain (db), pae (%) input power (dbm) -65 -60 -55 -50 -45 -40 -35 -30 -25 -20 12 14 16 18 20 22 24 26 28 acpr (dbc) source acpr w-cdma frequency: 2.14 ghz integration bw: 3.84 mhz 64 dpch 5v 5.5v 4.5v ingap hbt 1.6 watt power amplifier, 0.4 - 2.2 ghz for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com linear & power amplifiers - smt 11 11 - 189 outline drawing absolute maximum ratings collector bias voltage (vcc) +6.0 vdc control voltage (vpd) +5.4 vdc rf input power (rfin)(vs = vpd = +5vdc) +32 dbm junction temperature 150 c continuous pdiss (t = 85 c) (derate 58.5 mw/c above 85 c) 3.8 w thermal resistance (junction to ground paddle) 17.1 c/w storage temperature -65 to +150 c operating temperature -40 to +85 c notes: 1. leadframe material: copper alloy 2. dimensions are in inches [millimeters] 3. dimension does not include moldflash of 0.15mm per side. 4. dimension does not include moldflash of 0.25mm per side. 5. all ground leads and ground paddle must be soldered to pcb rf ground. 1 1.5 2 2.5 3 3.5 4 4.5 0 5 10 15 20 25 power dissipation (w) input power (dbm) max pdiss @ +85c 900 mhz 1900 mhz power dissipation part number package body material lead finish msl rating package marking [3] hmc453qs16g low stress injection molded plastic sn/pb solder msl1 [1] h453 xxxx HMC453QS16GE rohs-compliant low stress injection molded plastic 100% matte sn msl1 [2] h453 xxxx [1] max peak re ow temperature of 235 c [2] max peak re ow temperature of 260 c [3] 4-digit lot number xxxx package information hmc453qs16g / 453qs16ge v01.0205 ingap hbt 1.6 watt power amplifier, 0.4 - 2.2 ghz electrostatic sensitive device observe handling precautions for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com 11 11 - 190 linear & power amplifiers - smt pin descriptions pin number function description interface schematic 1, 2, 4, 5, 7-10, 13-16 gnd these pins & package bottom must be connected to rf/dc ground. 3vpd power control pin. for maximum power, this pin should be connected to 5v. a higher voltage is not recommended. for lower idle current, this voltage can be reduced. 6rfin this pin is dc coupled. off chip matching components are required. see application circuit herein. 11, 12 rfout rf output and dc bias input for the output ampli er stage. off chip matching components are required. see application circuit herein. 400 mhz application circuit recommended component values c1, c5 12 pf c2, c10 8.2 pf c3 6.8 pf c4, c7 100 pf c6 39 pf c8, c9 2.2 f l1 47 nh l2 40 nh l3, l4 4.3 nh r1 5.1 ohm tl1 tl2 tl3 tl4 tl5 tl6 impedance 50 ohm 50 ohm 50 ohm 50 ohm 50 ohm 50 ohm physical length 0.22 0.04 0.04 0.16 0.04 0.05 electrical length 5 1 1 4 1 1 pcb material: 10 mil rogers 4350, er = 3.48 this circuit was used to specify the performance for 400-410 mhz operation. contact the hmc applications group for assistance in optimizing performance for your application. hmc453qs16g / 453qs16ge v01.0205 ingap hbt 1.6 watt power amplifier, 0.4 - 2.2 ghz for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com linear & power amplifiers - smt 11 11 - 191 400 mhz evaluation pcb the circuit board used in this application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation board should be mounted to an appropri- ate heat sink. the evaluation circuit board shown is available from hittite upon request. list of materials for evaluation pcb 110865-400 [1] item description j1 - j2 pcb mount sma connector j3 2 mm dc header c1, c5 12 pf capacitor, 0402 pkg. c2, c10 8.2 pf capacitor, 0402 pkg. c3 6.8 pf capacitor, 0402 pkg. c4, c7 100 pf capacitor, 0402 pkg. c6 39 pf capacitor, 0402 pkg. c8, c9 2.2 f capacitor, tantalum l1 47 nh inductor, 0603 pkg. l2 40 nh inductor, 0402 pkg. l3, l4 4.3 nh inductor, 0402 pkg. r1 5.1 ohm resistor, 0402 pkg. u1 hmc453qs16g / HMC453QS16GE linear amp pcb [2] 110863 evaluation pcb, 10 mils [1] reference this number when ordering complete evaluation pcb [2] circuit board material: rogers 4350, er = 3.48 hmc453qs16g / 453qs16ge v01.0205 ingap hbt 1.6 watt power amplifier, 0.4 - 2.2 ghz for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com 11 11 - 192 linear & power amplifiers - smt 470 mhz application circuit recommended component values c1 12 pf c2 8.2 pf c3 6.8 pf c4, c7 100 pf c5 10 pf c6 39 pf c8, c9 2.2 f c10 5.6 pf l1 47 nh l2 40 nh l3, l4 4.3 nh r1 5.1 ohm tl1 tl2 tl3 tl4 tl5 tl6 impedance 50 ohm 50 ohm 50 ohm 50 ohm 50 ohm 50 ohm physical length 0.22 0.04 0.04 0.16 0.04 0.05 electrical length 6 1 1 4 1 1 pcb material: 10 mil rogers 4350, er = 3.48 this circuit was used to specify the performance for 450-496 mhz operation. contact the hmc applications group for assistance in optimizing performance for your application. hmc453qs16g / 453qs16ge ingap hbt 1.6 watt power amplifier, 0.2 - 2.4 ghz v01.0205 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com linear & power amplifiers - smt 11 11 - 193 470 mhz evaluation pcb the circuit board used in this application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation board should be mounted to an appropri- ate heat sink. the evaluation circuit board shown is available from hittite upon request. list of materials for evaluation pcb 110976-470 [1] item description j1 - j2 pcb mount sma connector j3 2 mm dc header c1 12 pf capacitor, 0402 pkg. c2 8.2 pf capacitor, 0402 pkg. c3 6.8 pf capacitor, 0402 pkg. c4, c7 100 pf capacitor, 0402 pkg. c5 10 pf capacitor, 0402 pkg. c6 39 pf capacitor, 0402 pkg. c8, c9 2.2 f capacitor, tantalum c10 5.6 pf capacitor, 0402 pkg. l1 47 nh inductor, 0603 pkg. l2 40 nh inductor, 0402 pkg. l3, l4 4.3 nh inductor, 0402 pkg. r1 5.1 ohm resistor, 0402 pkg. u1 hmc453qs16g / HMC453QS16GE linear amp pcb [2] 110863 evaluation pcb, 10 mils [1] reference this number when ordering complete evaluation pcb [2] circuit board material: rogers 4350, er = 3.48 hmc453qs16g / 453qs16ge ingap hbt 1.6 watt power amplifier, 0.2 - 2.4 ghz v01.0205 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com 11 11 - 194 linear & power amplifiers - smt 900 mhz application circuit this circuit was used to specify the performance for 810-960 mhz operation. contact the hmc applications group for assistance in optimizing performance for your application. recommended component values c1 5 pf c2, c3 3.3 pf c4, c7 100 pf c5 8.2 pf c6 56 pf c8, c9 2.2 f c10 1 pf l1 3 0 nh l2 20 nh r1 5.6 ohm tl1 tl2 tl3 tl4 impedance 50 ohm 50 ohm 50 ohm 50 ohm physical length 0.26 0.08 0.12 0.15 electrical length 14 4 6 8 pcb material: 10 mil rogers 4350, er = 3.48 hmc453qs16g / 453qs16ge ingap hbt 1.6 watt power amplifier, 0.2 - 2.4 ghz v01.0205 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com linear & power amplifiers - smt 11 11 - 195 900 mhz evaluation pcb the circuit board used in this application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation board should be mounted to an appropri- ate heat sink. the evaluation circuit board shown is available from hittite upon request. list of materials for evaluation pcb 108709-900 [1] item description j1 - j2 pcb mount sma connector j3 2 mm dc header c1 5.0 pf capacitor, 0402 pkg. c2, c3 3.3 pf capacitor, 0402 pkg. c4, c7 100 pf capacitor, 0402 pkg. c5 8.2 pf capacitor, 0402 pkg. c6 56 pf capacitor, 0402 pkg. c8, c9 2.2 f capacitor, tantalum c10 1.0 pf capacitor, 0402 pkg. l1 30 nh inductor, 0402 pkg. l2 20 nh inductor, 0402 pkg. r1 5.6 ohm resistor, 0402 pkg. u1 hmc453qs16g / HMC453QS16GE linear amp pcb [2] 108707 evaluation pcb, 10 mils [1] reference this number when ordering complete evaluation pcb [2] circuit board material: rogers 4350, er = 3.48 hmc453qs16g / 453qs16ge ingap hbt 1.6 watt power amplifier, 0.2 - 2.4 ghz v01.0205 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com 11 11 - 196 linear & power amplifiers - smt 1900 mhz application circuit recommended component values c1 0.8 pf c2 1.2 pf c3, c6 100 pf c4 4.7 pf c5 15 pf c7, c8 2.2 f l1 18 nh l2 20 nh r1 5.6 ohms this circuit was used to specify the performance for 1710-1990 mhz operation. contact the hmc applications group for assistance in optimizing performance for your application. tl1 tl2 impedance 50 ohm 50 ohm physical length 0.04 0.04 electrical length 4 4 pcb material: 10 mil rogers 4350, er = 3.48 hmc453qs16g / 453qs16ge ingap hbt 1.6 watt power amplifier, 0.2 - 2.4 ghz v01.0205 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com linear & power amplifiers - smt 11 11 - 197 1900 mhz evaluation pcb the circuit board used in this application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation board should be mounted to an appropri- ate heat sink. the evaluation circuit board shown is available from hittite upon request. list of materials for evaluation pcb 108721-1900 [1] item description j1 - j2 pcb mount sma connector j3 2 mm dc header c1 0.8 pf capacitor, 0402 pkg. c2 1.2 pf capacitor, 0402 pkg. c3, c6 100 pf capacitor, 0402 pkg. c4 4.7 pf capacitor, 0402 pkg. c5 15 pf capacitor, 0402 pkg. c7, c8 2.2 f capacitor, tantalum l1 18 nh inductor, 0402 pkg. l2 20 nh inductor, 0402 pkg. r1 5.6 ohm resistor, 0402 pkg. u1 hmc453qs16g / HMC453QS16GE linear amp pcb [2] 108719 evaluation pcb, 10 mils [1] reference this number when ordering complete evaluation pcb [2] circuit board material: rogers 4350, er = 3.48 hmc453qs16g / 453qs16ge ingap hbt 1.6 watt power amplifier, 0.2 - 2.4 ghz v01.0205 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com 11 11 - 198 linear & power amplifiers - smt 2100 mhz application circuit this circuit was used to specify the performance for 2100-2170 mhz operation. contact the hmc applications group for assistance in optimizing performance for your application. recommended component values c1 0.8 pf c2 1 pf c3, c6 100 pf c4 3.9 pf c5 15 pf c7, c8 2.2 f l1 12 nh l2 20 nh r1 5.1 ohm tl1 tl2 impedance 50 ohm 50 ohm physical length 0.04 0.04 electrical length 5 5 pcb material: 10 mil rogers 4350, er = 3.48 hmc453qs16g / 453qs16ge ingap hbt 1.6 watt power amplifier, 0.2 - 2.4 ghz v01.0205 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com linear & power amplifiers - smt 11 11 - 199 2100 mhz evaluation pcb the circuit board used in this application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation board should be mounted to an appropri- ate heat sink. the evaluation circuit board shown is available from hittite upon request. list of materials for evaluation pcb 109994-2100 [1] item description j1 - j2 pcb mount sma connector j3 2 mm dc header c1 0.8 pf capacitor, 0402 pkg. c2 1.0 pf capacitor, 0402 pkg. c3, c6 100 pf capacitor, 0402 pkg. c4 3.9 pf capacitor, 0402 pkg. c5 15 pf capacitor, 0402 pkg. c7, c8 2.2 f capacitor, tantalum l1 12 nh inductor, 0402 pkg. l2 20 nh inductor, 0402 pkg. r1 5.1 ohm resistor, 0402 pkg. u1 hmc453qs16g / HMC453QS16GE linear amp pcb [2] 108719 evaluation pcb, 10 mils [1] reference this number when ordering complete evaluation pcb [2] circuit board material: rogers 4350, er = 3.48 hmc453qs16g / 453qs16ge ingap hbt 1.6 watt power amplifier, 0.2 - 2.4 ghz v01.0205 |
Price & Availability of HMC453QS16GE
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |